Products

Something about us from a little bit of different perspective

FEATURES

DOUBLE MOLD-CARRIAGE IS DESIGNED IN SINGLE TO OCTONARY-DIE-HEAD BLOW MOLDING MACHINES, FULLY AUTOMATED WITH SAFETY LOCK SPECIALLY FOR HIGH THROUGHPUT PRODUCTION OF VARIOUS KINDS OF CONTAINERS, SUCH AS COSMETICS, DETERGENT BOTTLES, ETC., MOLD CARRIAGE IS DESIGNED TO TRAVERSE ON LINEAR MOTION GUIDES FOR OUTSTANDING PERFORMANCE AND HIGH EFFICIENCY. COMBINED WITH IN-MOLD LABELING MACHINES, FROM PC MATERIAL FEEDING TO FINAL PRODUCT LABELING, HELPS ACHIEVE FULLY AUTOMATIC OPERATIONS, ELIMINATES SECOND PROCESSING PROCEDURE. AUTOMATIC IN-MOLDING MACHINES FEATURING: 1. FULLY SERVER DRIVEN 2. HIGH SPEED 3. ACCURATE POSITIONING 4. EASY TO OPERATE AND MAINTAIN

CUSTOM MACHINE CONFIGURATIONS ARE AVAILABLE TO PRODUCE PRODUCT WITH VISI-STRIPE, TWO COLORS AND TWO LAYERS. OPTIONAL EQUIPMENT:1.MOOG 30/100 POINT PARISON CONTROL AVAILABLE 2.LEAK DETECTOR AVAILABLE

SPECIFICATIONS

Model No. (Unit)
PBSS-1005S 
1(pc)
PBSS-1005D
2(pc)
Screw Diameter (mm) 100x65x65 90x65x65x35
Screw L/D ratio (L/D) 26/1x24/1x24/1
26/1x24/1x
24/1x22/1
Inverter Motor(HP) 75x20x20 60x20x20x3
Screw Rotating Speed
(r.p.m)
15-65 15-65
Number of Heaters
(ZONE)
20 30
Heating Capacity
(kw)
51.6 56.7
Extruding Capacity
Per hour(kg/hr)
220x58x58 150x58x58x15
Mold Center Distance
(mm)
- 270
Open Close Daylight
(mm)
450-929 240-616
Height of Mold Capacity
(mm)
600 365
Width of Mold Capacity
(mm)
610 640
Dry Cycle Time
(Two Side) time(s)
8 5-8
Oil Hydraulic Drive Motor
(HP)
40 50
Clamping Force
(Ton)
21 17
Oil Tank Capacity
(gallon)
800L 800L
Pressure of air
(Kg/cm2)
5-10 5-10
Product Capacity
(CC / L)
15000-25000CC
15-25L
2000-5000CC
2-5L
Actual Electricity
Consumption (kw/hr)
76 70
Machine dimension
(LxWxH) m
5.7x5.3x3.9 5.3x6.4x3.7
Note:
1. Dry cycle time depends on product capacity, the larger the longer.
2. Layers are in proportion to screws. One layer reduced, one screw decreased.
3. The above data are for reference only. According to different features of products provided by clients, the data are
subject to change without any further notice.
4. If you’ve ordered our machine, the hole bitmap of our molds is available for your mold opening reference.


Model No. (Unit)
PBSS-1005T
3(pc)
PBSS-1005Q 
4(pc)
Screw Diameter (mm) 100x65x65 100x65x65
Screw L/D ratio (L/D) 26/1x24/1x24/1 26/1x24/1x24/1
Inverter Motor(HP) 75x20x20 75x20x20
Screw Rotating Speed 
(r.p.m)
15-65 15-65
Number of Heaters 
(ZONE)
27 26
Heating Capacity
(kw)
84.3 60
Extruding Capacity
Per hour (kg/hr)
220x58x58 220x58x58
Mold Center Distance
(mm)
250 180
Open Close Daylight
(mm)
240-616 240-616
Height of Mold Capacity
(mm)
400 372
Width of Mold Capacity
(mm)
800 640
Dry Cycle Time
(Two Side)
time(s)
5-8 5
Oil Hydraulic Drive
Motor (HP)
50 40
Clamping Force (Ton) 21.5 20
Oil Tank Capacity (gallon) 800L 800L
Pressure of air (Kg/cm2) 5-10 5-10
Product Capacity
(CC / L)
2500-5000CC
2.5-5L
500-2000CC
0.5-2L
Actual Electricity 
Consumption (kw/hr)
76 76
Machine dimension
(LxWxH) m
5.8x7.2x3.3 5.0x6.8x3.4
Note:
1. Dry cycle time depends on product capacity, the larger the longer.
2. Layers are in proportion to screws. One layer reduced, one screw decreased.
3. The above data are for reference only. According to different features of products provided by clients, the data are
subject to change without any further notice.
4. If you’ve ordered our machine, the hole bitmap of our molds is available for your mold opening reference.


Model No.
(Unit)
PBSS-1005H
6(pc)
PBSS-1005O
8(pc)
Screw Diameter 
(mm)
100x65x65 100x65x65
Screw L/D ratio 
(L/D)
26/1x24/1x24/1 26/1x24/1x24/1
Inverter Motor
(HP)
75x20x20 75x20x20
Screw Rotating speed 
(r.p.m)
15-65 15-65
Number of Heaters
(ZONE)
43 30
Heating Capacity
(kw)
87.13 54
Extruding Capacity 
Per hour
(kg/hr)
220x58x58 220x58x58
Mold Center Distance 
(mm)
160 85
Open Close Daylight
(mm)
240-640 240-640
Height of Mold Capacity
(mm)
365 325
Width of Mold Capacity
(mm)
1000 1000
Dry Cycle Time 
(Two Side) time(s)
5 5
Oil Hydraulic Drive Motor
(HP)
50 50
Clamping Force (Ton) 28 28
Oil Tank Capacity (gallon) 800L 800L
Pressure of air (Kg/cm2) 5-10 5-10
Product Capacity (CC / L)
1000-2200CC
1-2.2L
200-600CC
0.2-0.6L
Actual Electricity 
Consumption 
(kw/hr)
76 76
Machine dimension 
(LxWxH) m
5.9x5.8x3.3 5.9x5.8x3.3
Note:
1. Dry cycle time depends on product capacity, the larger the longer.
2. Layers are in proportion to screws. One layer reduced, one screw decreased.
3. The above data are for reference only. According to different features of products provided by clients, the data are
subject to change without any further notice.
4. If you’ve ordered our machine, the hole bitmap of our molds is available for your mold opening reference.


Model No.
(Unit)
PBSS-1005TT
10(pc)
PBSS-1005TW
12(pc)
Screw Diameter (mm) 100x65x65 100x65x65
Screw L/D ratio (L/D) 26/1x24/1x24/1 26/1x24/1x24/1
Inverter Motor(HP) 75x20x20 75x20x20
Screw Rotating Speed
(r.p.m)
15-65 15-65
Number of Heaters
(ZONE)

Calculated By Layers

Calculated By Layers

Heating Capacity
(kw)

Calculated By Layers

Calculated By Layers

Extruding Capacity
Per hour(kg/hr)
220x58x58 220x58x58
Mold Center Distance
(mm)
85 80
Open Close Daylight
(mm)
240-640 240-640
Height of Mold Capacity
(mm)
320 320
Width of Mold Capacity
(mm)
1000 1000
Dry Cycle Time
(Two Side) time(s)
5 5
Oil Hydraulic Drive Motor
(HP)
50 50
Clamping Force
(Ton)
28 28
Oil Tank Capacity
(gallon)
800L 800L
Pressure of air
(Kg/cm2)
5-10 5-10
Product Capacity
(CC / L)
200-600CC
02.-0.6L
200-600CC
0.2-0.6L
Actual Electricity
Consumption (kw/hr)
76 76
Machine dimension
(LxWxH) m
5.9x5.8x3.3 5.9x5.8x3.3
Note:
1. Dry cycle time depends on product capacity, the larger the longer.
2. Layers are in proportion to screws. One layer reduced, one screw decreased.
3. The above data are for reference only. According to different features of products provided by clients, the data are
subject to change without any further notice.
4. If you’ve ordered our machine, the hole bitmap of our molds is available for your mold opening reference.


Model No.
(Unit)
PBSS-1005D-
TL-PE
PBSS-1005Q-
VS-TL-PE
Screw Diameter (mm) 80x100x80 80x115x80
Screw L/D ratio (L/D) 26/1x26/1x26/1 26/1x26/1x26/1
Inverter Motor(HP) 40x70x40 40x400x40
Screw Rotating Speed
(r.p.m)
15-50 15-50
Number of Heaters
(ZONE)
30 49
Heating Capacity
(kw)
69 113
Extruding Capacity
Per hour(kg/hr)
100x180x100 100x260x100
Mold Center Distance
(mm)
270 270
Open Close Daylight
(mm)
240-640 240-540
Height of Mold Capacity
(mm)
400 450
Width of Mold Capacity
(mm)
640 1150
Dry Cycle Time
(Two Side) time(s)
8 12
Oil Hydraulic Drive Motor
(HP)
50 50
Clamping Force
(Ton)
26 32
Oil Tank Capacity
(gallon)
165 206
Pressure of air
(Kg/cm2)
6 6
Product Capacity
(CC / L)
10000CC
10L
4000-5000CC
4-5L
Actual Electricity
Consumption (kw/hr)
75 92
Machine dimension
(LxWxH) m
7.9x6.1x3.5 10x7.0x3.9
Note:
1. Dry cycle time depends on product capacity, the larger the longer.
2. Layers are in proportion to screws. One layer reduced, one screw decreased.
3. The above data are for reference only. According to different features of products provided by clients, the data are
subject to change without any further notice.
4. If you’ve ordered our machine, the hole bitmap of our molds is available for your mold opening reference.